行业动态

当前位置: 首页 > 新闻中心 > 行业动态 >

开平ALC/ACC/NALC轻质隔墙板设备时应留心哪些疑问?

日期:2019-01-10 / 文章来源:http://qingzhizhuan.com.cn

ALC/ACC/NALC轻质隔墙板设备时应留心哪些疑问?
ALC/ACC/NALC轻质隔墙板设备时的安全办法
Safety measures for installation of ALC/ACC/NALC lightweight partition board
1、施工前应对操作人员进行安全教育,进行有关于性的具体安全交底,需求操作人员自觉恪守各项安全出产规章准则。
1, before the construction, the operators should be taught safety education, carry out specific and specific security basis, and require the operators to consciously abide by the rules and regulations of the safety production.
2、进入施工现场人员应做好安全防护,凡从事2米以上无法选用可靠防护设备的高处作业人员有必要系安全带,按规则正确佩戴安全帽。
2, the personnel entering the construction site should be safe and safe. Those who are unable to use the reliable protection facilities more than 2 meters must wear safety belts and wear safety helmets according to the regulations.
3、隔墙工程的脚手架搭设应契合建筑施工安全标准。
3. Scaffolding erection of partition works should conform to the safety standards for building construction.
4、电工等特别作业人员有必要持证上岗。
4, electrician and other special operations personnel must be certified.
5、一切机电用具有必要设备漏电维护设备,并有杰出的接地维护。
5. All electrical and mechanical appliances must be installed with earth leakage protection devices and have good grounding protection.
6、施工现场不得乱扔墙板碎块、杂物等,以防伤人。
6, the construction site should not throw wallboards, debris and sundries, so as to avoid hurting people.
7、恪守操作规程,非操作人员禁绝动用机电东西。
7. Observe the operation rules. No operator shall use mechanical and electrical tools.
8、现场配备专职安全员,对安全施工施行全进程监控。
8. The site is equipped with full-time security personnel to monitor the whole process of safety construction.
ALC/ACC/NALC轻质隔墙板设备时的环保办法
Environmental protection measures for the installation of ALC/ACC/NALC lightweight partition board
1、对现场施工人员进行环境维护教育,加强施工人员的环境维护知道。
1, environmental protection education should be carried out for site construction workers to enhance the awareness of environmental protection for construction workers.
2、有噪声的电开东西应在规则作业时刻内施工,避免噪声污染、扰民。
2, electric tools with noise should be constructed within the prescribed working hours to prevent noise pollution and nuisance.
3、施工现场工完场清,设专人洒水、打扫,不能扬尘污染环境。建筑废物做到会集堆积,每日清运,保证作业区坚持规整清洁。
3. The construction site is clear after the work is completed, and the special person will sprinkle water and clean up. Construction waste can be centrally stacked and transported daily to ensure that the work area is kept clean and tidy.
4、切开墙板作业宜关闭进行,作业人员应配备防护办法。
4. Cutting wall panels should be closed. Workers should be equipped with protective measures.
ALC/ACC/NALC轻质隔墙板设备时应留心哪些疑问?
轻质隔墙板做清洁间隔墙的优点有哪些?
用轻质隔墙板做清洁间隔墙有哪些优点?轻质节能墙板优良的防水功能,用作清洁间隔墙无疑是防水,防潮,防霉变的较好选择。因为清洁间的水汽较重、湿润,假定通风欠好简略发生霉变。而轻质隔墙板经实验证明不吸水,不回潮。在无做任何防水饰面的情况下,用水泥粘结成池体装满水,轻质墙板不和能坚持单调,不留痕迹,在湿润气候里也不会呈现冷凝水珠,较之加气砖其防潮防水功能非常好一点。
What are the advantages of using lightweight partition boards to make toilet partitions? The lightweight water-saving wallboard has excellent waterproof performance. It is undoubtedly a better choice for toilet partition wall to be waterproof, moisture-proof and mildew resistant. Because the water vapor in the toilet is heavy and humid, if it is not well ventilated, it will be mildew easily. The lightweight partition board is proved to be non absorbent and no moisture regain. In the absence of any waterproof decoration, cement is bonded into a pool filled with water, and the back of the lightweight wall panel can be kept dry without leaving traces. In humid weather, it will not be condensed, and the moisture proof and waterproof performance of the air brick is a little better than that of the air brick.

ALC/ACC/NALC轻质隔墙板与EPS轻质隔墙板的差异
首要,EPS其实是在ALC/ACC/NALC轻质隔墙板产品的根底上改进的一种新式的环保墙材,EPS轻质隔墙板的质地比ALC/ACC/NALC隔墙板要轻,报价比ALC/ACC/NALC要高,将来跟着轻质隔墙板整个供给链的生长,eps隔墙板的报价必定会降低下来的。

ALC/ACC/NALC轻质隔墙板

其次,ALC/ACC/NALC轻质隔墙板和eps轻质隔墙板产品都是现代环保墙材的代表,都可以有用的前进房子的环保功能和降低造价的功用,首要差异在于ALC/ACC/NALC轻质隔墙板当前首要用于雕塑和现代建筑的外墙和幕墙的主材料。那么关于EPS轻质隔墙板呢,众所周知EPS轻质隔墙板主打的特征就是保温隔热,所以EPS轻质隔墙板通常是对保温隔热有需要的现代别墅和行政大楼,相同咱们晓得EPS隔墙板也可以用来做间隔或许表里墙的填充材料。

轻质隔墙板有几个首要施工要害
轻质隔墙板是一种新式节能墙材料,它是一种外型像空心楼板相同的墙材,可是它两端有公母隼槽,设备时只需将板材立起,公、母隼涂上少量嵌缝砂浆后对拼装起来即可。那么,轻质隔墙板的施工首要有几个要害呢?咱们一同来看看吧!
 
Lightweight partition board is a new type of energy-saving wall material. It is a kind of wall material with the appearance of hollow floor. But it has male and female falcon grooves on both sides. When it is installed, only the board is erected, and the male and female falcons are coated with a small amount of slotted mortar. So, what are the main points in the construction of light partition panels? Let's take a look together.
 
1、厨卫间、衣帽间深度有必要满足台面石需求。
 
1, kitchen and toilet rooms must meet the requirements of countertops.
 ALC/ACC/NALC轻质隔墙板设备时应留心哪些疑问?
2、门洞处有必要有门垛。
 
2, doorways must have door pits.
 
3、尽量选用T形板、L形板处置多块墙板奉告部位,避免阴角开裂。
 
3, try to use T - shaped plate and L - shaped plate to deal with multiple wall panels to avoid the corner cracking.
 
4、根据墙板的定位从头调整厨卫间反坎浇筑规模,避免现场切开。
 
4, according to the positioning of the wallboard, re adjust the pouring range between kitchen and toilet to avoid site cutting.
轻质隔墙板
 
5、厨房烟道有宽梁方位需加厚墙板保证抽油烟机烟管设备。
 
5, the kitchen flue has wide beam position, thick wall panels are required to ensure the installation of smoke pipes.
 
6、根据水电管线、底盒定位调整排版,避免跨缝设备。
 
6, according to the location of the water and electricity pipelines and bottom boxes, adjust the typesetting so as to avoid cross seam installation.
 
7、将强弱电箱尽可以在剪力墙或规划墙中预埋,避免后期塞填开裂。
 
7, the strong and weak electric boxes can be embedded in shear walls or structural walls as far as possible, so as to avoid later plugs and fill cracks.
 
以上七点就是关于轻质隔墙板的首要施工要害了,若我们有认为有任何不精确的当地,等待指出!
 
The above seven points are about the main construction points of lightweight partition panels, if you think there are any inaccuracies, welcome to point out!
ALC/ACC/NALC轻质隔墙板设备时应留心哪些疑问?
轻质隔墙板五大优势之处
1.简练节能造价经济节约

①.因为是新式的节能墙体材料,像空心楼板相同的墙材,所以进行设备施工便利便利。

②节约许多施工时刻,降低劳作作业强度,满足我们关于不一样环境的需求。

③.广泛使用于商务作业楼以及民居楼内,设备简便便利,上手快易把握。

④.产品商场前景广大,合适创业者出资打开。

2.环保扩展房子空间大

①.产品运用的原材料不富含对人体有害的化学物质和无放射性元素

②.节约被工业废渣并吞的土地本钱,根绝工业废渣对大气本钱水本钱的污染。

③.契合国家GB/T23449-2009    JC/T 169-2016查验标准。

④.轻质隔墙板分为表里墙两种墙体,内墙的隔墙板安置合理可以充分有用的扩展所居住所屋的占地空间。

3.三防:防火防潮防水

①.防火。产品处在一千摄氏度的高温条件下耐火的极限时刻不低于三个小时,燃烧期间不会宣告有毒性气体,不可以燃性抵达国家A级标准。

②.防水。根据科学实验标明,轻质墙板在不做任何表层防水饰面的条件下,将墙体负载铅块放入装满水的水池底部,拿出水后,墙面既能坚持单调也不会留下被铅块负重过的痕迹。

③.防潮。墙板放在处于湿润气候的室外环境里也不会呈现湿润大气中集结的冷凝水珠。原料单调性高,不受湿润性外界影响。

4.两隔一保:隔音隔热保温

①.隔音。墙体具有杰出的隔音作用,它的隔音成效契合国家住所隔音的需求标准,一起也极大的高于砌砖墙体的隔音作用。

②.隔热。因为制造技能的不一样,一起也抉择着墙体隔热作用,夹层内含原料的不一样,也会影响墙体隔热时刻长短的成效。

③.保温。保温的成效和隔热的成效是成正比的,隔热的作用的好坏一起也是衡量保温作用的,杰出的保温会让室内环境愈加舒畅的。

5.全体性好 可吊挂力强

①.安设备备选用三体合一的规划,联接后抗冲击性强,规划紧凑不松垮。

②.抗震功能强,不变形,不松懈,全体性好。

③.墙体可直接用作吊车载体进行吊挂重物,

④.墙体表面光滑平坦不会发生粉尘颗粒可贴瓷砖、木饰、墙纸。

ALC/ACC/NALC轻质隔墙板的具体施工设备工序

首要,墙板选配时假定有门洞,从门洞口向两边配板;无门洞,从主体墙、柱的一端向另一端次序设备。梁(板)底、墙(柱)面、楼地上与墙板触摸部位及墙板两边企口槽榫处有必要收拾洁净,与墙板联系的部位应极力找平。放线、分档。在地上、墙面及顶面根据排板图方位,弹好隔墙边线及门窗洞边线,并按板宽分档。

其次,设备固定钢卡。按方案需求和排板卡将所需钢板卡用射钉固定,钢板卡使用镀锌钢板卡。板侧与规划固定处钢板卡间隔不大于1000mm,板顶每块板2个。制造镁水泥料浆,根据原材料质量、环境温度等要素断定配方制造料浆,料浆要均匀,通常应在60min内用完。设备ALC/ACC/NALC轻质隔墙板。 先将规划底层及榫头和拼槽涂刷一层料浆,将墙板顶面板孔用泡沫棒封堵,然后在板顶、板侧拼槽处刮抹料浆,厚度不小于15mm,按弹线方位设备就 位,在墙板下部实心肋处打入木楔,再用手平推墙板,使板缝冒浆,缝宽控制在5~10mm为宜,调整时一人用撬棍在板底部向上顶,另一人打入木楔,使墙板挤 紧顶实,在设备进程中随时将墙板找平找正。然后用腻子刀将挤出的料浆刮平。按以上操作办法顺次设备墙板。

宁波ALC/ACC/NALC轻质隔墙板

然后,无门洞墙,从转角至墙边设备;有门洞墙从洞口往两端设备,当隔墙长度按墙板摆放图呈现缺乏一块整板时,应按标准需求补板,补板宽度不宜小于200mm。补板用专用东西切开,补板应摆放在墙中,墙端设备整板。设备完一整面墙后,经查验合格后,对墙板底部打扫洁净,将板下口堵严,板缝料浆及板下料浆维护3d后将木楔取出,并用料浆灌实。铺设电线管、安接线盒,设备管卡、埋件。电气配管与墙板设备相协作。将竖向管预埋于板孔内,并标出配线盒开孔方位,将水平管布设于顶棚或地上垫层内。水电 暖管道、箱盒、用具固定点等板面开洞应在隔墙板设备7d后进行,穿墙管道选用钻孔机成孔,箱盒选用切开机切开所需标准的方孔,用防腐木塞塞堵断面处板孔, 再用料浆抹实找平。一切电线管有必要顺墙板空心孔铺设,阻止横铺或斜铺。

最终,门窗框设备。门窗框的设备应在隔墙设备结束7d后进行。 门 窗框的设备办法通常选用先留门窗洞口,后安门窗框的办法。墙上留洞标准每侧应比门窗框外围标准大5mm,设备时坚持邻近缝隙均匀共同,将门窗固定在门窗框 板预埋的防腐木砖上。其周边缝隙先用岩棉条填实,外口剩下10mm,用密封胶填平至光滑,构成弹性减震缝。节点做法。墙板与主体规划之间选用柔性联接,在墙板的旁边面或顶部设钢板卡。ALC/ACC/NALC轻质隔墙板接缝及墙面处置。墙板接缝的处置应在门窗框及管线设备结束7d后进行。查看一切缝隙是不是粘结杰出,有无裂缝破损,如呈现裂缝破损,应查明 缘由后进行修补。 已粘结好的一切板缝、阴角缝,收拾浮灰后刮料浆,贴50mm宽玻璃纤维网格布,转角隔墙在阳角处张贴200mm宽(每边100mm宽)玻璃纤维网格布一 层,压实、粘牢,表面再用料浆刮平。